how-to-change-dhcp-lease-time-windows-10

How To Change DHCP Lease Time Windows 10

Every computer and device in a network is assigned an IP address that can be static or dynamic depending upon the configuration of the router and the Internet Service Provider. If you are using a dynamic IP configuration, then the IP of each device on your network is refreshed after a defined interval.

How To Change DHCP Lease Time Windows 10

This system is dealt with with the aid of the DHCP server that is a carrier strolling on the router. When the desired time frame is over the DHCP server assigns a brand new IP deal with to the device that is referred to as DHCP Lease. Usually, the time is 24 hours or 1440 mins and then the IP is renewed. But often time customers may come upon community mistakes which includes common disconnection from an internet server. The server might require a persistent IP address and the router’s DHCP settings might be renewing the IP extra regularly so that you may need to lengthen the rent time for a more stable connection to the far off server.

Change DHCP Lease Time Using Router

In this method, we are able to get right of entry to the router interface to configure the DHCP Lease time for the reason that DHCP Lease is controlled by way of the router and there is no local interface on Windows 10 through which you may configure those settings. These settings are managed with the aid of the server and your gadget is a customer. You can, however, use the command prompt to view your cutting-edge IP deal with and the time whilst it is set to be renewed.

PRO TIP: If the issue is with your computer or a laptop/notebook you should try using Restoro Repair which can scan the repositories and replace corrupt and missing files. This works in most cases, where the issue is originated due to a system corruption. You can download Restoro by Clicking Here

  1. Go to Windows Menu and open the Command Prompt
    Open Command Prompt
  2. Enter the ‘ipconfig /all‘ command and press Enter.
    See lease time
  3. You can see the time when the new IP was leased and when it will expire
  4. Now, open your browser and type the IP address of the router, it is usually 192.168.0.1 but you can also see that on the back of your router to find out. This will allow you to log in to the router’s interface.
  5. Login to your router
  6. Enter your user name and password to log in.
  7. In your router’s interface click on the DHCP Settings.
  8. You should see an option that says Address lease Time, enter the desired lease time here in minutes, for example, if you want the lease to expire after two hours you can enter 120 minutes and click Save.

    Enter the Address Lease Time
  9. Your router may reset after you apply the settings this usually takes a few seconds after that you can open the command prompt and see that the IP lease time has been changed.

TIP: If none of the Methods have resolved the issue for you, we recommend using Restoro Repair Tool which can scan the repositories to replace corrupt and missing files. This works in most cases, where the issue is originated due to a system corruption. Restoro will also optimize your system for maximum performance. You can download Restoro by Clicking Here

Related Posts