Fix: Monster Hunter World Error Code 50382-MW1


A lot of Monster Hunter: World players are prevented from joining their friends by the Error Code 50382 mw1. This particular error code on all platforms (PlayStation 4, Xbox One and Microsoft Windows). Most affected users report that the issue is mostly occurring when they try to do a story quest together with one or multiple friends.

Error Code 50382 mw1
Error Code 50382 mw1

What is causing the error code 50382 mw1?

After investigating the issue and looking at various user reports, we managed to identify a couple of scenarios that seem to trigger the error code 50382 mw1. Here’s a shortlist with them along with a quick explanation:

  • UPnP not supported by router – Even though the game is configured to use UPnP (Universal Plug and Play), if you have an old router, you might need to open up some ports used by Monster Hunter manually.
  • Wi-fi connection is destabilizing network connection – This error is reported to occur frequently on laptops that have both a network cable and Wi-fi network connected at the same time. Several users have reported that the issue was resolved as soon as they disabled the Wi-Fi connection.
  • Capcom servers need to be adjusted to your network – On PC, you might have to add additional launching parameters in order to ensure that Co-up play is stable.
  • In-Game server browser max ping is too high – As per various user reports, this error is expected to occur if your network connection is not steady enough to support the default Steam settings of 5000 Pings/minute.

If you’re currently trying to remedy this unique problem, this article will offer you with a sequence of troubleshooting steps. Below you have a set of strategies that different Monster Hunter: World players in a similar scenario have used to get the issue resolved.

Keep in mind that a number of the methods underneath will now not be relevant on your scenario, relying at the platform you’re encountering the problem on. For the best consequences, observe the methods underneath in the order that they’re provided till you stumble upon an relevant repair that efficiently manages to get the problem resolved. Let’s begin!

Method 1: Disconnect Wi-Fi network (PC only)

If you’re encountering the error on a laptop that is using both a wired and a wireless network connection, you might want to disable the Wi-Fi component. Several users in a similar situation have managed to get the issue resolved by disabling the Wi-fi connection.

If the same scenario applies to yourself, disable your Wi-Fi connection and see if you are able to join your friends in Monster Hunter: World without the Error Code 50382 mw1. 

If you see the same error message repeating, move down to the next method below.

Method 2: Create Steam Network Shortcut with -nofriendsui parameter (PC Only)

Several users that had been encountering this difficulty on Steam (PC ) have reported that the difficulty become constant after they created a desktop shortcut of the steam sport and used a chain of launching parameters.

If you’re wondering what these parameters are doing – they will pressure the Steam patron to use the vintage Friends UI and UDP/TCP protocol as opposed to the new WebSocket.

This supposedly circumvents an issue that Capcom has with their servers and can emerge as resolving the Error Code 50382 mw1. Here’s a quick guide on how you could create a laptop icon for Monster Hunter and upload two nofriendsui parameters to it’s launching segment:

  1. Open steam, right-click on Monster Hunter: World and select Create Desktop Shortcut.
    Note: If you have not brought Monster Hunter: World through steam (you’re using a physical copy), skip this step altogether.
  2. Right-click on the desktop shortcut and choose Properties.
  3. Next, go to the Shortcut tab where we will start adding parameters to the Target entry. To do this, add ‘-nofriendsui -udp’ at the end of the Target field and click on Apply.

    Adding -nofriendsui -UDP or -nofriendsui -tcp parameters to Monster Hunter: World shortcut
    Adding -nofriendsui -udp or -nofriendsui -tcp parameters to Monster Hunter: World shortcut
  4. Launch Monster Hunter World via the shortcut that you’ve created and seen if the error has been resolved. If you’re still encountering the Error Code 50382 mw1 error, repeat step 3 again but this time add the ‘-nofriendsui -tcp’ parameter instead and hit Apply.
  5. Launch the game again and see if the modification is successful. If it isn’t, move down to the next method below.

Method 3: Changing the In-game matchmaking browsing ping to 250

Some users have successfully been able to resolve the problem indefinitely by modifying a built-in steam setting called In-Game server browser: Max Pings / minute. This can resolve the Error Code 50382 mw1 for those of you that are using an unstable internet connection that facilitates the apparition of networking problems when browsing various game servers.

Here’s a quick guide on changing the In-game matchmaking browsing ping to 250:

PRO TIP: If the issue is with your computer or a laptop/notebook you should try using Restoro Repair which can scan the repositories and replace corrupt and missing files. This works in most cases, where the issue is originated due to a system corruption. You can download Restoro by Clicking Here

  1. Open steam and go to Steam > Settings (right-hand side) using the ribbon at the top."Steam
  2. Using the right pane of the Settings menu, choose In-Game.
  3. Next, go to the bottom where it says In-Game server browser: Max pings/minute and change the default settings (Automatic (5000) to 250.
    Change In-Game server browser: Mox pings / minute to 250
    Change In-Game server browser: Mox pings / minute to 250
  4. Click Ok to save the changes, then launch Monster Hunter: World again to see if you are able to join you friend’s session. If you’re still encountering the same issue, move down to the next method below.

Method 4: Forwarding some ports in your router

Capcom formally recommends that you forward some ports utilized by Monster Hunter: World if you’re experiencing connectivity troubles or instability. Keep in mind that older routers had been not designed to allow incoming community requests. Because of this, forwarding an incoming connection through the router to the sport could make the community enjoy loads better.

The precise steps of forwarding the specified ports are exceedingly dependent on your router model and manufacturer. However, you may follow this guide as a tough indicator on the stairs which you need to take for you to get your Monster Hunter: World ports forwarded:

  1. First, you need to discover your router’s address. There are a couple of ways to do this, but let’s go for a method that is both free and easy. Pop open a Command Prompt window by pressing Windows key + R, type “cmd” and press Enter.
    Run dialog: cmd and press Ctrl + Shift + Enter
    Run dialog: cmd and press Enter
  2. Inside the Command Prompt, type “ipconfig” and hit Enter to get an Ethernet adapter overview. Next, scroll down to the Default Gateway of your connected internet network and copy it. This is your router address.
  3. Open your browser and insert the router IP address that you previously fetched in the address bar and press Enter.
    Acess your Router's settings
    Access your Router’s settings
  4. You will be prompted to insert your login credentials (username + passwords). If you haven’t changed those yourself, you might get lucky using default values like Username: admin and Password: admin or Username: admin and Password: 1234.
    Note: Your router model might have different default credentials. In this case, do an online search with the query ” *router model* + default login credentials” and you should be able to discover the default values.
  5. Next, you’ll need to discover the IP address of the computer or console that is running the game. On Windows, you can do this easily by following Step 1 and discovering the IP under IPv4 Adress. On Xbox One, you can find the IP address in Settings > Network > Advanced Settings. On PS4,  go to Settings > Network > View Connection Status.
    Finding computer’s IP address under IPv4 Address
  6. Now that you have the IP address of the device that is running Monster Hunter, return to your router settings and look for a Port Forwarding (or Forwarding) setting.

Next, open the connection ports required by Monster Hunter world. Here’s a list with ports used by the game according to various platforms:


TCP: 27015-27030,27036-27037
UDP: 4380,27000-27031,27036

PlayStation 4

TCP: 1935,3478-3480
UDP: 3074,3478-3479

Xbox One

TCP: 3074
UDP: 88,500,3074,3544,4500

Save the changes in your router, then move to the device that is running the game, open Monster Hunter: World and see if the issue has been resolved.

TIP: If none of the Methods have resolved the issue for you, we recommend using Restoro Repair Tool which can scan the repositories to replace corrupt and missing files. This works in most cases, where the issue is originated due to a system corruption. Restoro will also optimize your system for maximum performance. You can download Restoro by Clicking Here